Using Vonage With a Bridge Radio and Router

When we installed your Wireless System, we put in a Workgroup Bridge and a Router. The router can be either wireless or wired; does not make a difference here.

Installation Instructions

1. Unpack the Vonage box, plug it in and connect a telephone to port #1
2. Use their blue or yellow cable, and connect it from one of our Router's ports to the WAN or Internet port on the Vonage box.
3. The Internet light should be lit on the front panel of the Vonage box. If not, you will need a CAT5 Crossover cable. OnALot.com makes these up for $5 for a 6 footer, and $1 / foot for longer ones.
4. Make a phone call!

Give us a call if you need any help, or if you need a Crossover cable.